EasyPro 6000 Pressurized Bead Filter - PBF6000

The PBF6000 is the bead filter on its own. Polyethylene body, six position control head, and 3 cubic feet of Ultimate Tube media already loaded. Backwashing is a lever pull instead of a teardown.

It is rated for ponds up to 6,000 gallons. That rating assumes a normal fish load, so if you keep koi and stock them heavily, step up to the PBF10000 instead.

What you get

• Heavy duty polyethylene filter body, built to hold pressure without flexing
• Six position control head, so backwash and rinse are a lever position rather than a strip down
• 3 cubic feet of Ultimate Tube media, already in the tank
• 2" inlet and outlet

What you still need

This is the filter only. You supply the pump, and the UV clarifier if you want one. The high flow media creates very little back pressure, so you are not forced into an oversized pump to push water through it.

If you would rather have the pump, filter and UV arrive plumbed together on one skid, look at the SMF6000 skid mount system instead.

Specs

• Pond capacity: up to 6,000 gallons
• Inlet and outlet: 2"
• Media: 3 cubic feet Ultimate Tube
• Control head: six position
• Body: heavy duty polyethylene

PBF6000 product data sheet (PDF)

Before you order

This ships by freight. You need somewhere a truck can get to and a second set of hands to move it. Work out where the filter will sit before it arrives: level ground, near the pond, with room to open the head for service.

Not sure between this, the 3600 and the 10000? Run your pond through the sizing calculator, or call Tony at 862.362.1444 and we will size it together.