Skip to content
EasyPro & Universal Pond Supply Equipment Free system guidance from Tony Contractor-Grade Pond Equipment
Free system guidance from Tony

PCA500 - 19740 GPH 230v EasyPro® Self-Priming High Flow External Pump

by EasyPro
SKU PCA500
Save 8% Save 8%
Original price $2,899.99
Original price $2,899.99 - Original price $2,899.99
Original price $2,899.99
Current price $2,682.49
$2,682.49 - $2,682.49
Current price $2,682.49
Financing available at checkout

PRODUCT DESCRIPTION

The PCA500 is a 5 HP self-priming external pump that moves up to 19,740 GPH through 3-inch plumbing, for large waterfalls, streams and bog filters. It lifts water 5 to 8 feet above the water level, so it can sit dry beside the pond and still pull from a skimmer or intake line.

Not sure it's the right size? Email your pond size, waterfall height and pipe run to support@aquascapeeco.com, or call 862-362-1444 (Mon–Fri, 9–5 ET). We'll size it with you before you buy.

Shipping Details

Aquascape Eco offers multiple shipping options at checkout. Eligible orders over $200 may qualify for economy shipping in the contiguous United States. Pond liners, oversized items, freight items, supplier-restricted items, and orders requiring special handling may be excluded. Standard parcel shipping charges and available methods are shown at checkout. Freight may apply — we’ll contact you to confirm any additional cost for your approval before shipment.

For products listed by the manufacturer as motor freight only, Aquascape Eco will contact the customer before shipment if added freight confirmation, liftgate service, terminal pickup, or special delivery handling is needed.

Read more about Aquascape Eco shipping policy.

EasyPro source details

PCA500 product details and included components

Specs below come from EasyPro's PCA Series data sheet. Check flow at your head height, voltage and plumbing before ordering.

Product Details

Brand EasyPro
Model / SKU PCA500
Product family Self-priming external pond pump
Max flow 19,740 GPH (at 15 ft of head)
Max head (shut-off) 65 ft
Horsepower 5 HP
Voltage 208–230V, single phase, 60 Hz
Max watts / amps 4,000 W / 17.6 A
Inlet / outlet 3 in., unions included
Self-priming lift 5–8 ft above water level
Motor Continuous duty, open drip-proof (ODP), 3,450 RPM
Power cord None – hardwired by an electrician
Housing Corrosion-resistant polypropylene, stainless shaft seal, large built-in strainer basket
Warranty 3-year limited (fresh water) / 1-year limited (salt water)
Included PCA500 pump with strainer basket, two 3 in. union fittings

Downloadable Content

Final shipping service, delivery access, taxes, and order totals are shown before purchase or confirmed by Aquascape Eco support. Oversized, freight, supplier-restricted, and special-handling products may be excluded from generic free/economy shipping.

Need help checking fit? Contact Aquascape Eco at support@aquascapeeco.com or +1 862-362-1444.

Description

Is this the right fit, and what to have ready before it arrives.
  • Good fit: high-flow waterfalls and streams, large bog or bead filters, and installs where the pump should sit on dry ground. Max head is 65 ft.
  • Other sizes: PCA300 (17,800 GPH).
  • Power: needs a 230V circuit and an electrician to hardwire it – there is no plug.
  • Weather: the open drip-proof motor needs a cover or pump house; don't leave it exposed to rain or sprinklers.
  • Head height: flow drops as head rises. Add vertical lift to pipe-run friction and compare it to the 65 ft shut-off.
  • Plumbing: run 3-inch pipe on both sides to get rated flow – smaller pipe chokes this pump.
  • Not swim-rated – not for pools or swim ponds.
EasyPro product guidance Authorized EasyPro Dealer

Check fit before ordering

Confirm size, compatibility, site conditions, delivery access, and install requirements before ordering.

Sizing and specs to confirm

Use these points to catch sizing, compatibility, and site-fit issues before purchase.

Product family Pond pump
Model / SKU PCA500
Best fit Pump replacements or upgrades sized by real head height, not zero-head flow.
Confirm before ordering GPH at head height, pipe size, intake protection, check valve, power rating, and cleanout access.
Tony's check For larger builds, submit photos and measurements before ordering freight or special-order equipment.

Before ordering

  • Target GPH is checked at actual head height.
  • Pipe size supports the expected flow.
  • Intake protection, check valve, and cleanout access are planned.

Need a second look?

Send photos, gallons, fish load, flow, head height, and timeline. Tony can help check fit before you order.

Submit project details